Master Touch 32 Inch Black AG Surface Treatment GG Structure Touch Panel Screen
1. Product Description
This 32 inch capacitive industrial touch screen panel product belongs to our standard USB interface product, compatible with various common operation systems, black silk screen printing around, direct drive-free, can save some pre-development time. It is more suitable for the whole machine products mounted by flat assemble way. G+G structure has a long sustainable supply, and stable performance.
2. Basic Features
| Item | Feature | Remarks |
| Controller | EXC84H5680STAG | - |
| Channel | TX: 44 RX: 78 | - |
| Power | 5V | USB: 4.7V ~ 6.0V, Typical:5V |
| Communication | USB | USB: 2.0 Full Speed |
| Number of Touch point | 10 | - |
| O.S. | Windows/ Android/ Linux | plug and play |
| Power Consumption | 1.Active Mode: Max.120mA @ USB Input 5V 2.Idle Mode: 90mA @ USB Input 5V 3.Sleep Mode: less than 1mA @ USB Input 5V |
3. Mechanical Characteristics
| Item | Specification | Unit |
| Viewing Area | 697.4(L)×391.9(W) | mm |
| Cover Lense O.D. | 646(L)×384(W) |
4. Optical Characteristics
| Item | Specification |
| Transparency | Viewing Area | ≧85% |
5. Sensor Specification
| Item | Specification | Unit |
| Stacked structure | Cover | 3.0 | mm |
| LOCA | 0.3 | mm |
| ITO | 1.1 | mm |
| Sensor Glass |
| ITO |
| Sensor Dimension | OD Size | X | 719.7 | mm |
| Y | 416.3 | mm |
6. Drawing
7. Details
8. Cosmetic Inspection
The following standard only applies to the visual areas. If the TP function is good, the non-visual appearance may negotiate to relax the standard. W=Width L=length D=Diameter GT=Glass thickness. If soft cloth which dips in alcohol can wipe besmirch, it does not apply to this appearance standards.
Inspection methods and conditions:
1)Inspection environment: Temperature:20-22 ℃; Humidity: 65 + 10% RH;
2)Inspector qualifications: The appearance of product must be inspect by a good eyesight inspector.
3) Inspection methods: The distance between inspector and product should be 30±2cm and putting a lamp 12 to 20 watts of cold white fluorescent lamp in the observation station of product.
Pay attention to the following matters when inspection:
A.Inspectors must wear a fingerstall.
B.Put the product in front of inspector, hands hold the edge of products carefully and can’t make it bended.
C.Inspectors shouldn’t stare at a certain point but continue covered watching.
D.According to the following standards judge whether products conform to the requirement. If found other defect, from perspective of appearance consider whether customers accept this defect in end product.
9. FAQ
Product Tags:
|
|
10 Points GG RX78 TX44 Channel 32 Inch Touch Panel Black AG Surface Images
|
